Turbo Kits

 

 SpeedLab 20G Subaru Turbo Upgrade
SpeedLab introduces its high horsepower turbo available for the Subaru WRX and STI in bolt on configuration. The SL20G TD06 turbine wheel 20G compressor wheel with a 0.57 A/R. The SL20G typically produces 350-380WHP with astounding spool up response and efficiency. The exhaust housing retains the stock Subaru flange patterns and internal wastegate is standard on the SL20G with an adjustable 15psi high pressure actuator and is capable of filling the Subaru motor with over 25 psi of boost if called upon.

Install is simple and straightforward, allowing use of existing exhaust and intercooler components. This unit operates very effectively in the 18-25psi range on the 2.5 engine found on the WRX, STi and Forester XT. Log on to speedlab.com.ph or call 376-4648/51 to power up your Subaru.

 

 Tomei ARMS M7760 Turbo for Subaru STI/WRX EJ20/25 - P115,000
The ARMS M7760 is the largest bolt-on turbo possible that the engineers can fit into the limited space of the EJ engine. Despite the size, the internals of the turbocharger speaks other wise; extracting the most and finest efficiency from its design. The end result is a turbo that maintains the best characteristics of the EJ engine with the added benefit of an extended power band to the high RPM region. The crucial step in tuning the EJ is the turbocharger upgrade where the increase in overall performance can be acquired.

 

 ATP Garrett Ball Bearing GT3076 - P125,000
Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing CHRA which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency. All accompanying oil and coolant supply components included in each kit have been designed to properly and seamlessly bridge the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.

Just bolt the turbo on, add fueling and a good tune and prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

 

 SpeedLab SL20 SpeedLab TD0620G Turbo - P80,000
- For all Subaru WRX/STi/Forester EJ20/25
-TD06SL2 turbine
-20g compressor wheel
-52.5mm/68mm compressoer diameter A/R 57
-Up to 400hp

 

 SpeedLab Diesel Blow Off Valve - P12,500
Turbo diesel cars now have that coveted whoosh sound that is so characteristic of turbo vehicles. SpeedLab's new Diesel Blow Off Valve works by using an electronic/mechanical throttle trigger that reads throttle position in conjunction with pneumatic action of a standard blow off valve. The kit is universal and installation is application dependent. Most diesel vehicles require a front mount intercooler setup to be able to install the blow off valve properly.

 

 SpeedLab Honda Jazz/City Turbo Kit - P135,000
SpeedLab introduces it's first complete 100% bolt on kit for the Honda Jazz and City, 1.3L and 1.5L engines, automatic or manual transmission. Kit contains everything and installs in a about 10 days by our technicians. Dyno proven to deliver an increase of 40hp - 60hp. Our kit consists of the following:
 
- GT15 turbocharger
- Cast iron turbo manifold &    outlet
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Front mount intercooler		 - HKS or Greddy BOV
- Oil supply & return lines
- 440cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning

 

 SpeedLab Honda Civic R18 Turbo Kit - P150,000
SpeedLab introduces the first complete 100% bolt on kit for the new Honda Civic 1.8L R18 engines, automatic or manual transmission. Kit contains everything and installs in a about 10 days by our technicians. Dyno proven to deliver an increase of 70hp-90hp. Our kit consists of the following:
 
- GT28 turbocharger
- Cast iron turbo manifold & outlet
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Front mount intercooler		 - HKS or Greddy BOV
- Oil supply & return lines
- 590cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning

 

 SpeedLab Toyota Altis Turbo Kit - P145,000
SpeedLab now offers its 100% bolt on kit for the Toyota Altis. Our kit fits both 1.6L and 1.8L manual or automatic transmission Altis. Dyno proven to deliver an increase of 70hp-90hp. Our kit consists of the following:
 
- GT28 turbocharger
- Cast iron turbo manifold & outlet
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Front mount intercooler 		- HKS or Greddy BOV
- Oil supply & return lines
- 590cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning

 

 Ford Focus/Mazda 3 Turbo Kit - P150,000
SpeedLab now offers its 100% bolt on kit for the Ford Focus or Mazda 3. We have kits for both 1.6L and 2.0L engines. Dyno proven to deliver an increase of 50hp-60hp. Our kit consists of the following:
 
- GT28 turbocharger
- Cast iron turbo manifold & outlet
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Front mount intercooler 		- HKS or Greddy BOV
- Oil supply & return lines
- 590cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning

 

 Subaru Turbo Conversion Kit - P180,000
SpeedLab now offers its 100% bolt on turbo conversion kit non-turbo Impreza's and Forester's. All bolt on parts with no opening up of the engine. Additional 60-70hp over stock power. Our kit consists of the following:
 
- Subaru IHI or GT28    turbocharger
- Tubular turbo manifold & upipe
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Subaru top mount intercooler
- Turbo downpipe 		- HKS BOV
- Oil supply & return lines
- 4 pcs 450cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning

 

 BMW 316 Turbo Kit - P185,000
Kit inlcudes the following components:
 
- T28 turbocharger
- Stainless Steel manifold & outlet
- Stainless/Aluminum steel pipings
- Silicon hose couplers
- K&N high flow filter
- Delta Fin front mount intercooler
- HKS or Greddy BOV (taiwan) 		- Oil supply & return lines
- 590cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning
- fits both automatic and manual transmission cars

 

 Toyota Vios/Yaris Turbo Kit - P150,000
SpeedLab now offers its 100% bolt on kit for the Toyota Yaris or Vios We have kits for both 1.3L and 1.5L engines. Dyno proven to deliver an increase of 35hp-45hp. Our kit consists of the following:
 
- GT25 turbocharger
- Cast iron turbo manifold & outlet
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Front mount intercooler		 - HKS or Greddy BOV
- Oil supply & return lines
- 590cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning

 

 SpeedLab Lancer EX Kit - P155,000
SpeedLab now offers its 100% bolt on kit for the Lancer EX 2.0L equipped with the new 4B11 engine. Dyno proven to deliver an increase of 70hp-80hp. Our kit consists of the following:
 
- GT28 turbocharger
- Cast iron turbo manifold & outlet
- Stainless steel pipings
- Silicon hose couplers
- K&N high flow filter
- Front mount intercooler 		- HKS or Greddy BOV
- Oil supply & return lines
- 590cc Injector
- Unichip piggyback engine management
- Labor and installation
- Dyno tuning
Suzuki Swift Turbo Kit - P160,000
Dyno proven 145hp on a stock Suzuki Swift. IHI turbo with full stainless steel piping and silicon hose couplings. Kit includes exhaust manifold, turbo, intercooler, BOV, wastegate, additional injectors and all pipings and brackets for bolt on installation.